25 accepted papers
In semi-decentralized federated learning, devices primarily rely on device-to-device communication but occasionally interact with a central server. Periodically, a sampled subset of devices uploads their local models to the server, which computes an aggregate model. The server can then either (i) sh
This paper presents a comprehensive approach to federated learning in wireless networks. We discuss communication strategies that address packet loss and bitrate limitations in both uplink and downlink transmissions, and introduce FABLE, a novel optimization algorithm designed to operate effectively…
We consider a MIMO communication system operating in dynamic time-division duplex, where one uplink (UL) access point (AP) detects information symbols transmitted from UL users (UEs) in the presence of AP-AP interference (AAI) caused by the signal a downlink (DL) AP transmits to a DL UE. We propose…
Impulsive noise can appear in communication links. In the literature, it was demonstrated that when the noise is impulsive, standard Gaussian receivers perform poorly because of the outliers in the noise. Therefore, appropriate receivers must be used when the noise is impulsive. In this paper, we co…
Cell-free massive multiple-input-multiple-output (CF-mMIMO) is a next-generation wireless access technology that offers superior coverage and spectral efficiency compared to conventional MIMO. With many future applications in unlicensed spectrum bands, networks will likely experience and may even be…
Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by…
In this paper we consider joint beamforming of data to scheduled terminals (STs) and broadcast of system information (SI) to idle terminals (ITs) on the same time-frequency resource in multi-cell multi-user massive MIMO systems. We propose two different multi-cell approaches to the broadcast of SI,…
A large-scale distributed antenna system that serves the users by coherent joint transmission is called Cell-free Massive MIMO (multiple input multiple output). For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexib…
Lately, Passive Intelligent Surfaces (PIS) are being recognized to play an important role in meeting the timely demand of low-cost green sustainable Internet of Things (IoT). In this paper, we focus on maximizing the sum received power among the energy harvesting IoT users by jointly optimizing the…
An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumsta…
This paper studies the transmit power optimization in a multi-cell massive multiple-input multiple-output (MIMO) system. To over-come the scalability issue of network-wide max-min fairness (NW-MMF), we propose a novel power control (PC) scheme. This scheme maximizes the geometric mean (GM) of the pe…
In this paper, we study an active user detection problem for massive machine type communications (mMTC). The users transmit pilot-hopping sequences and detection of active users is performed based on the received energy. We utilize the channel hardening and fa-vorable propagation properties of massi…
Backscatter communication (BSC) is emerging as the core technology for pervasive sustainable internet-of-things applications. However, owing to the resource-limitations of passive tags, this work targets at maximizing the achievable sum-backscattered-throughput by jointly optimizing the transceiver…
Future cellular networks are expected to support new communication paradigms such as machine-type communication (MTC) services along with human-type communication (HTC) services. This requires base stations to serve a large number of devices in relatively short channel coherence intervals which rend…
We study joint unicast and multigroup multicast transmission in single-cell massive multiple-input-multiple-output (MIMO) systems, under maximum ratio transmission. For the unicast transmission, the objective is to maximize the weighted sum spectral efficiency (SE) of the unicast user terminals (UTs…
This work introduces a new approach to solve the joint precoding and power allocation for sum rate maximization problem in the downlink multiuser MIMO by a combination of random matrix theory and optimization theory. The new approach results in a simplified problem that, though non-convex, obeys a s…
The high hardware complexity of a massive MIMO base station, which requires hundreds of radio chains, makes it challenging to build commercially. One way to reduce the hardware complexity and power consumption of the receiver is to lower the resolution of the analog-to-digital converters (ADCs). We…
Consider the uplink transmission of a single-cell multi-user multiple-input multiple-output (MIMO) system with K single-antenna users and a base station (BS) equipped with a very large number of antennas denoted by M. Consider a jamming device with N > M distributed antennas attempting to deteriorat…
We design jamming resistant receivers to enhance the robustness of a massive MIMO uplink channel against jamming. In the pilot phase, we estimate not only the desired channel, but also the jamming channel by exploiting purposely unused pilot sequences. The jamming channel estimate is used to constru…
In massive MIMO systems, which rely on uplink pilots to estimate the channel, the time interval between pilot transmissions constrains the length of the downlink. Since switching between up- and downlink takes time, longer downlink blocks increase the effective spectral efficiency. We investigate th…
Consider a multicell multiuser MIMO (multiple-input multiple-output) system with a very large number of antennas at each base station (BS). The number of users in each cell is assumed to be fixed as the number of BS antennas grows large. Under certain conditions on the powers of the transmitting use…
We investigate the performance of wideband massive MIMO base stations that use one-bit ADCs for quantizing the uplink signal. Our main result is to show that the many taps of the frequency-selective channel make linear combiners asymptotically consistent and the quantization noise additive and Gauss…
Massive MIMO systems, where the base stations are equipped with hundreds of antenna elements, are an attractive way to attain unprecedented spectral efficiency in future wireless networks. In the "classical" massive MIMO setting, the terminals are assumed fully loaded and a main impairment to the pe…
We consider the massive MIMO downlink with time-division duplex (TDD) operation and conjugate beamforming transmission. To reliably decode the desired signals, the users need to know the effective channel gain. In this paper, we propose a blind channel estimation method which can be applied at the u…
In this paper we deal with spoofing detection in GNSS receivers. We derive the optimal genie detector when the true positions are perfectly known, and the observation errors are Gaussian, as a benchmark for other detectors. The system model considers three dimensional positions, and includes correla…