5 accepted papers
Applications involving serial manipulators, in both co-manipulation with humans and autonomous operation tasks, require the robot to render high admittance so as to minimize contact forces and maintain stable contacts with high-stiffness surfaces. This can be achieved through admittance control, how
Control techniques like MPC can realize contact-rich manipulation which exploits dynamic information, maintaining friction limits and safety constraints. However, contact geometry and dynamics are required to be known. This information is often extracted from CAD, limiting scalability and the abilit…
Industrial robots have increased payload, repeatability, and reach compared to collaborative robots, however, they have a fixed position controller and low intrinsic admittance. This makes realizing safe contact challenging due to large contact force overshoots in contact transitions and contact ins…
Admittance and impedance controllers are often purely feedforward, using measured external force or motion, respectively, to generate a reference for an inner-loop controller. In this case, the range of dynamics which can be rendered is limited by the inner-loop, which causes, e.g. contact stability…
This paper presents a comprehensive comparative study of the multisensor-based force observers for accurate force control. A force controlled system which contains a force sensor for measuring force transmitted to the load by the motor and an encoder for measuring motor position is considered as the…