20 accepted papers
In this work, we leverage Gaussian Processes (GPs) and present a learning-based control scheme for the transportation of cable-suspended loads with multirotors. Our ultimate goal is to approximate the model discrepancies that exist between the actual and nominal system dynamics. Towards this directi
This paper presents a novel vision-based approach for tracking deformable contour targets using Unmanned Aerial Vehicles (UAVs) through combining image moments descriptor and a Policy Iteration scheme ensuring stability and generalization of knowledge to new tasks. This computationally efficient and
In this letter, we investigate the integration of a Dynamic Vision Sensor (DVS) into an Unmanned Aerial Vehicle (UAV) with a cable-suspended load in order to achieve a robust and fast estimation of the cable's state during the transportation of the load. Based on the advantageous properties of event
In this work, we present a nonlinear Model Predictive Control (NMPC) scheme for tracking a ground target using a multirotor with a cable-suspended load. The NMPC framework relies on the dynamic model of the UAV with the suspended load and, hence, an estimate of the load state is obtained by fusing t…
This paper presents a novel approach for tracking deformable contour targets using Unmanned Aerial Vehicles (UAVs). The proposed scheme combines image moments descriptor and Event-Triggered (ET) Nonlinear Model Predictive Control (NMPC) for efficient and accurate tracking. The deformable contour mod
In this paper, we present an event-based control framework for the efficient tracking of contour-based areas, such as road pavements, using a multirotor aerial vehicle equipped with a bio-inspired Dynamic Vision Sensor (DVS). Concerning the detection part, the DVS camera captures events, which are a…
In this paper, an Event-triggered Image-based Visual Servoing Nonlinear Model Predictive Controller (ET-IBVS-NMPC) for multirotor aerial vehicles is presented. The proposed scheme is developed for the autonomous surveillance of contour-based areas with different characteristics (e.g. forest paths, c…
This paper addresses the problem of water sampling by using a multirotor UAV with a cable-suspended mechanism. In order to ensure the safe execution of the sampling procedure and the stabilization of the vehicle, the disturbances, induced by the water flow and transferred through the cable, have to…
This letter presents the dynamic modeling, the gait sequence design, and the control architecture of the BADGER autonomous underground robot. BADGER is a modular and articulated robotic mechanism which employs inchworm biomimetic motion to drill and propel within the soil. It is used to drill and ma
This paper presents a novel control strategy for the compensation of the slippage effect during non-rigidly grasped object manipulation. A detailed dynamic model of the interconnected system composed of the robotic manipulator, the object and the internal forces and torques induced by the slippage e…
This paper addresses the problem of cooperative object transportation for multiple Underwater Vehicle Manipulator Systems (UVMSs) in a constrained workspace involving static obstacles. We propose a Nonlinear Model Predictive Control (NMPC) approach for a team of UVMSs in order to transport an object…
In this work, we present a decentralized motion planning and control architecture for the cooperative loading task using heterogeneous robotic agents operating in a cluttered workspace with static obstacles. Initially, we tackle the problem of calculating a set of feasible loading configurations via…
This paper presents the design of a vision-based object grasping and motion control architecture for a mobile manipulator system. The optimal grasping areas of the object are estimated using the partial point cloud acquired from an onboard RGB-D sensor system. The reach-to-grasp motion of the mobile…
This paper presents a novel Nonlinear Model Predictive Control (NMPC) scheme for underwater robotic vehicles operating in a constrained workspace including static obstacles. The purpose of the controller is to guide the vehicle towards specific way points. Various limitations such as: obstacles, wor…
This paper addresses the fault tolerant control problem for an omni-directional mobile platform with four mecanum wheels moving on a well-known flat and constrained workspace with static obstacles. As a fault, we consider the case where a wheel cannot be actuated and hence it rotates freely around i
It is well known that a real-time visual servoing task which employs a Visual Tracking Algorithm (VTA) imposes high computational cost to robotic system, which consequently results in higher energy consumption and lower autonomy. Motivated by this fact, this paper presents a novel Image Based Visual…
This paper proposes an autonomous landing scheme for a small-scale flybarless helicopter equipped with low-cost navigation sensors. The main contribution of this paper is the design of a model-free motion controller that guarantees autonomous landing with prescribed transient and steady state respon…
In this paper, we study the decentralized control problem of a two-agent system under local goal specifications given as temporal logic formulas. The agents collaboratively carry an object in a leader-follower scheme and lack means to exchange messages on-line, i.e., to communicate explicitly. Speci…
This paper addresses the problem of cooperative object transportation by two nonholonomic wheeled robots, with the coordination relying exclusively on implicit communication. We implement a leader-follower scheme, considering compliant contact between the object and the follower. Only the leader has…
This paper presents a vision-based Leader-Follower cooperative scheme which consists of two underwater vehicles in the absence of explicit communications and direct information interchange. A novel method for implicitly calculating the relative pose between the two vehicles is introduced. The absolu…