32 accepted papers
The Filtered-x Normalized Least Mean Square (FxNLMS) algorithm suffers from slow convergence and a risk of divergence, although it can achieve low steady-state errors after sufficient adaptation. In contrast, the Generative Fixed-Filter Active Noise Control (GFANC) method offers fast response speed,…
The Kalman filter (KF)-based active noise control (ANC) system demonstrates superior tracking and faster convergence compared to the least mean square (LMS) method, particularly in dynamic noise cancellation scenarios. However, in environments with extremely high noise levels, the power of the contr…
Virtual sensing (VS) technology enables active noise control (ANC) systems to attenuate noise at virtual locations distant from the physical error microphones. Appropriate auxiliary filters (AF) can significantly enhance the effectiveness of VS approaches. The selection of appropriate AF for various…
Delayless noise control is achieved by our earlier generative fixed-filter active noise control (GFANC) framework through efficient coordination between the co-processor and real-time controller. However, the one-dimensional convolutional neural network (1D CNN) in the co-processor requires initial…
Active noise control (ANC) has been widely utilized to reduce unwanted environmental noise. The primary objective of ANC is to generate an anti-noise with the same amplitude but the opposite phase of the primary noise using the secondary source. However, the effectiveness of the ANC application is i…
By assigning the massive computing tasks of the traditional multichannel active noise control (MCANC) system to several distributed control nodes, distributed multichannel active noise control (DM-CANC) techniques have become effective global noise reduction solutions with low computational costs. H…
Autonomous soundscape augmentation systems typically use trained models to pick optimal maskers to effect a desired perceptual change. While acoustic information is paramount to such systems, contextual information, including participant demographics and the visual environment, also influences acous…
Due to the slow convergence and poor tracking ability, conventional LMS-based adaptive algorithms are less capable of handling dynamic noises. Selective fixed-filter active noise control (SFANC) can significantly reduce response time by selecting appropriate pre-trained control filters for different…
Head-related transfer function (HRTF) is an essential component to create an immersive listening experience over headphones for virtual reality (VR) and augmented reality (AR) applications. Metaverse combines VR and AR to create immersive digital experiences, and users are very likely to interact wi…
The remote microphone technique (RMT) is often used in active noise control (ANC) applications to overcome design constraints in microphone placements by estimating the acoustic pressure at inconvenient locations using a pre-calibrated observation filter (OF), albeit limited to stationary primary ac…
Active noise control (ANC) technology is commonly used to cancel acoustic noise in daily life. The conventional ANC headphone, being one of the mature commercial products that implement this approach, utilizes microphones on its earcup to pick up the reference signal. However, in a multi-noise sourc…
Echo and noise suppression is an integral part of a full-duplex communication system. Many recent acoustic echo cancellation (AEC) systems rely on a separate adaptive filtering module for linear echo suppression and a neural module for residual echo suppression. However, in practice, adaptive filter…
Convolutional recurrent networks (CRN) integrating a convolutional encoder-decoder (CED) structure and a recurrent structure have achieved promising performance for monaural speech enhancement. However, feature representation across frequency context is highly constrained due to limited receptive fi…
In recent years, latent variable models, such as the Conditional Variational Auto Encoder (CVAE), have been applied to both personalized and empathetic dialogue generation. Prior work have largely focused on generating diverse dialogue responses that exhibit persona consistency and empathy. However,…
Soundscape augmentation, which involves the addition of sounds known as "maskers" to a given soundscape, is a human-centric urban noise mitigation measure aimed at improving the overall sound-scape quality. However, the choice of maskers is often predicated on laborious processes and is inflexible t…
Polyphonic sound event localization and detection (SELD) has many practical applications in acoustic sensing and monitoring. However, the development of real-time SELD has been limited by the demanding computational requirement of most recent SELD systems. In this work, we introduce SALSA-Lite, a fa…
Polyphonic sound event detection and localization (SELD) task is challenging because it is difficult to jointly optimize sound event detection (SED) and direction-of-arrival (DOA) estimation in the same network. We propose a general network architecture for SELD in which the SELD network comprises s…
Feedforward active noise control (ANC) is widely utilized to attenuate the broadband noise picked up by the reference microphone. However, in some situations, it is impractical to obtain a clean reference signal when the noise source is far away from the controller. Hence, we adopt a wireless refere…
Polyphonic sound event detection and direction-of-arrival estimation require different input features from audio signals. While sound event detection mainly relies on time-frequency patterns, direction-of-arrival estimation relies on magnitude or phase differences between microphones. Previous appro…
The gradual adaptation and possibility of divergence have been the two main obstacles in the efficient implementation of conventional adaptive active noise control (ANC) to a wider range of applications. Selective ANC (SANC) has been proposed to rapidly reduce noise by selecting a pre-trained contro…
Active noise control is an efficient approach in dealing with unwanted acoustic disturbances. However, most of the active noise control algorithms aim to control the signal of the error sensor leading to local noise attenuation only around the error microphones. One of the approaches to enlarge the…
This paper revisits the virtual sensing active noise control (VS-ANC) technique and extends it to a general multichannel ANC (MCANC) implementation. A frequency domain analysis shows that the multichannel virtual sensing ANC (VS-MCANC) technique arrives at an optimal control filter to cancel the noi…
Augmented Reality (AR) audio applications require headphones to be acoustically transparent so that real sounds can pass through unaltered for natural fusion with virtual sounds. In this paper, we consider a multiple source scenario for hear through (HT) equalization (EQ) using closed-back circumaur…
Selective active noise control (SANC) is a method to select a pre-trained control filter for different primary noises, instead of using conventional real-time computation of the control filter coefficients. SANC has the advantage of improving the robustness of control filter while reducing the compu…
Binaural audio plays an indispensable role in virtual reality (VR) and augmented reality (AR). Binaural audio recreates the sensation of the three dimensional auditory experience using Head- Related Transfer Functions (HRTFs). HRTFs are as unique as our fingerprint. To achieve an immersive audio exp…
Multichannel active noise control (MCANC) systems are commonly used in acoustic noise or vibration control, such as large-dimension ventilation ducts, open windows and mechanical structures. However, its computational load far exceeds the capabilities of digital signal processors (DSPs) and microcon…
With the availability of many low-cost programmable development kits in the market, real-time signal processing projects can now be readily introduced into today's signal processing and embedded system course curriculum. In this paper, we group these popular development kits in terms of their cost,…
Head related transfer function (HRTF) is widely used in 3D audio reproduction, especially over headphones. Conventionally, HRTF database is acquired at discrete directions and the acquisition process is time-consuming. Recent works have been proposed to improve HRTF acquisition efficiency via contin…
Spatial sound systems aim at rendering realistic sound experience to the listeners with uniform sound fields in the entire listening area. Today with the advancement of multichannel surround sound techniques, such systems are being practically realized, especially, at theatres, lecture halls, audito…
The virtual bass system (VBS) can enhance the bass performance of small or flat loudspeakers by tricking the human brain to perceive the fundamental frequency from its higher harmonics. However, additional harmonics may lead to arithmetic overflow and cause distortion due to clipping, especially dur…
In spatial audio analysis-synthesis, one of the key issues is to decompose a signal into primary and ambient components based on their spatial features. Principal component analysis (PCA) has been widely employed in primary component extraction, and shifted PCA (SPCA) is employed to enhance the prim…
Individualization of head-related transfer functions (HRTFs) can be realized using the person's anthropometry with a pretrained model. This model usually establishes a direct linear or non-linear mapping from anthropometry to HRTFs in the training database. Due to the complex relation between anthro…