6 accepted papers
Robotic manipulators are increasingly being used to perform additive manufacturing. The accuracy of a built part is dependent on the trajectory execution error of the manipulator. For articulated manipulators, the trajectory execution error and achievable build accuracy vary considerably over the wo…
Multi-arm mobile manipulators can be represented as a combination of multiple robotic agents from the perspective of task-assignment and motion planning. Depending upon the task, agents might collaborate or work independently. Integrating motion planning with task-agent assignment is a computational…
High-performance composites are increasingly being used in the industry. Sheet layup is a process of manufacturing composite components using deformable sheets. We have developed a robotic cell to automate the layup process and overcome the limitations of the manual layup. Generating offline traject…
Extrusion-based additive manufacturing (AM), also known as fused deposition modeling (FDM) extrudes filaments through a heated nozzle and builds a part layer-by-layer. Using a smaller diameter nozzle can achieve better surface finish. However, there is a trade-off between surface finish and build ti…
We pose the problem of path-constrained trajectory generation for the synchronous motion of multi-robot systems as a non-linear optimization problem. Our method determines appropriate parametric representation for the configuration variables, generates an approximate solution as a starting point for…
Successfully completing a complex manufacturing task requires finding a feasible placement of the workpiece in the robot workspace. The workpiece placement should be such that the task surfaces on the workpiece are reachable by the robot, the robot can apply the required forces, and the end-effector…