26 accepted papers
In this letter, we propose a three-dimensional (3-D) walking and skating motion generation method to achieve sequential walking and skating motion with skateboard and roller skate. For generating the sequential stable skating motion using a passive wheel, we must deal with non-coplanar contacts with
In this paper, we present the achievement of aerial grasping by shape adaptive transformation to the object shape, using a novel transformable aerial robot called HALO: Horizontal Plane Transformable Aerial Robot with Closed-loop Multilinks Structure. Aerial manipulation is an active research area a…
In this paper, we develop a bipedal robot control system that has an ability to perform instantaneous high power and flexibility to absorb an impulsive disturbance. We utilize a sensor-less whole body torque control method executed in a high responsive realtime distributed system. This system also i…
In this paper, we propose novel methods suitable for online real time whole body master-slave control with real life-sized humanoid robot. We conducted some dynamic whole body master-slave experiment with life-sized humanoid robot, and we achieved speedier and flexible master-slave operation compare…
The sequential online tuning for controller gains is required for the continuous action of the riding into parallel two-wheeled scooter and the speed governing after riding by humanoid robot. The implemented controllers are different between the riding and the speed governing, and these tuning strat…
Comparing to IK (Inverse Kinematics) based motion control, joint-space motion control is more advantageous in terms of not being restricted by kinematics singularity problem. In this paper, we start with SIMBICON (Simple Biped Locomotion Control) based controller, a joint-space motion control method…
For robots to autonomously achieve manipulation tasks in various scenes, advanced operational skills such as tool use, learning from demonstration, and multi-robot/human-robot cooperation are necessary. In this research, we devise a method for robots to realize such operational skills in a unified m…
In this paper, we propose methods for walking on a steep slope using a rope by a humanoid robot. There are two difficulties for walking on a steep slope without a rope. First, range of motion of ankle joints get limited. Second, feet of a robot slip on a steep slope. For these problems, using a rope…
This paper presents a COM trajectory generation method for 3D walking and skating motion by nonlinear optimization. In our method, we solve the following problems: (1) dealing with both walking and skating motion in the same framework, (2) generating center of mass (COM) trajectory faster than execu…
In this study, we propose a novel method to operate whole body of a humanoid robot, which also includes both feet, dynamically and safely with the master-slave approach. The conventional whole body master-slave approaches need static balancing assumption or a certain time length of planning after op…
For humanoid robots, unexpected collision can cause instability of robot balancing and damage to both robots and environment. This paper presents a reactive bipedal walking controller against swing foot collision for humanoid robots. This controller is composed of following three components: 1) Swin…
In this paper, we described a new developed life-size humanoid robot. A purpose of the developed robot is to realize continuous operation for a long time and to improve an action autonomously. we considered three aspects of robustness, mechanical robustness, functional robustness and robustness of a…
Whole-body manipulation is necessary for a humanoid robot to achieve tasks such as carrying large objects. One difficulty for achieving a whole-body manipulation is that the robot needs to select the appropriate operation from a list of candidates, such as lifting, pushing, and tilting. The appropri…
This paper shows a method for achieving multi-contact motion for a humanoid robot on a movable object, such as climbing of a stepladder. Recent research has developed methods for achieving multi-contact motion that considers various constraints, such as joint limits, torques, balance constraints, re…
Recent studies have explored humanoid robots in contact with the environment in various ways. However, many of them assumed static rather than sliding contacts. Studies on humanoid shuffle motion planning have realized sliding motions, such as turning, but relied on quasi-static balance control. In
To achieve tasks in unknown environments with high reliability, highly accurate localization during task execution is necessary for humanoid robots. In this paper, we discuss a localization system which can be applied to a humanoid robot when executing tasks in the real world. During such tasks, hum…
Groping behavior based on contact sensors is necessary for manipulation in an unknown environment. For those situations, it is effective for a robot to accumulate contact information as an environment map, and to plan the motions for executing the safe trial motion. We first propose a method of upda
In this paper, we propose a real-time control method for skating motion of humanoid robots. There are three problems for skating motion: (1) keeping dynamic balance, (2) adequately controlling foot force to suppress slipping at the foot, (3) controlling full-body motion in real-time. For solving the…
For generating motions of robots, global search in configuration space is time consuming although it is sometimes indispensable (e.g. collision avoidance in complex environment). Our idea is to use global sampling algorithm not in the state space but in the task nullspace, which is the redundant deg…
Humanoid robot has the potential to manipulate wide range of tools in daily life. Arms and legs of humanoid robot contribute this ability. Above all, manipulation tasks for vehicles which are the same size as a life-sized humanoid or larger size than it require the operational motion by both arms an…
In this paper, we develop a waterproof suit for humanoid robots and propose an underwater walking control method. Although very few life-sized humanoid robots are completely waterproof, we can easily make these humanoid robots watertight by putting a waterproof suit on them. In water, humanoid robot…
For generating whole-body behavior involving contacts with environments such as climbing ladder behavior or walking on terrain behavior, “contact-before-motion” approach was used in some previous researches. By separating contact search process and motion search process, whole-body behavior generati…
This paper presents a novel control method to stabilize the whole-body motion of humanoid robots when climbing vertical ladders and transitioning between ladders and catwalks. In such environments, the body of the robot tends to incline and rotate because of the slippery surfaces. The inclination an…
In situations where humanoid robots with constrained posture walk through a narrow space (e.g. manufacturing plants and kitchens), shuffling motions that are stepless and possess wide foot supporting area are effective. One of the difficulties of humanoid's shuffle translations is the load distribut…
Whole-body holding manipulation is effective for carrying the handleless large object. In order to keep the object stability, the dexterous transition motion is necessary. From geometric and physical conditions of object manipulation, we propose the general method of generating the transition graph,…
Humanoid robot is able to execute various behavior to manipulate objects because of high degree-of-freedom around the whole-body. Although hands contact with objects and exert force in ordinary pushing motion by robot, pushing motion contacting with the object at various regions of whole-body has po…